Search for: All records

Global water models are increasingly used to understand past, present and future water cycles, but disagreements between simulated variables make model-based inferences uncertain. Although there is empirical evidence of different large-scale relationships in hydrology, these relationships are rarely considered in model evaluation. Here we evaluate global water models using functional relationships that capture the spatial co-variability of forcing variables (precipitation, net radiation) and key response variables (actual evapotranspiration, groundwater recharge, total runoff). Results show strong disagreement in both shape and strength of model-based functional relationships, especially for groundwater recharge. Empirical and theory-derived functional relationships show varying agreements with models, indicating that our process understanding is particularly uncertain for energy balance processes, groundwater recharge processes and in dry and/or cold regions. Functional relationships offer great potential for model evaluation and an opportunity for fundamental advances in global hydrology and Earth system research in general.

 

Abstract Droughts that exceed the magnitudes of historical variation ranges could occur increasingly frequently under future climate conditions. However, the time of the emergence of unprecedented drought conditions under climate change has rarely been examined. Here, using multimodel hydrological simulations, we investigate the changes in the frequency of hydrological drought (defined as abnormally low river discharge) under high and low greenhouse gas concentration scenarios and existing water resource management measures and estimate the time of the first emergence of unprecedented regional drought conditions centered on the low-flow season. The times are detected for several subcontinental-scale regions, and three regions, namely, Southwestern South America, Mediterranean Europe, and Northern Africa, exhibit particularly robust results under the high-emission scenario. These three regions are expected to confront unprecedented conditions within the next 30 years with a high likelihood regardless of the emission scenarios. In addition, the results obtained herein demonstrate the benefits of the lower-emission pathway in reducing the likelihood of emergence. The Paris Agreement goals are shown to be effective in reducing the likelihood to the unlikely level in most regions. However, appropriate and prior adaptation measures are considered indispensable when facing unprecedented drought conditions. The results of this study underscore the importance of improving drought preparedness within the considered time horizons. 

Abstract. In the context of changing climate and increasing waterdemand, large-scale hydrological models are helpful for understanding andprojecting future water resources across scales. Groundwater is a criticalfreshwater resource and strongly controls river flow throughout the year. Itis also essential for ecosystems and contributes to evapotranspiration,resulting in climate feedback. However, groundwater systems worldwide arequite diverse, including thick multilayer aquifers and thin heterogeneousaquifers. Recently, efforts have been made to improve the representation ofgroundwater systems in large-scale hydrological models. The evaluation ofthe accuracy of these model outputs is challenging because (1) they areapplied at much coarser resolutions than hillslope scale, (2) they simplifygeological structures generally known at local scale, and (3) they do notadequately include local water management practices (mainly groundwaterpumping). Here, we apply a large-scale hydrological model (CWatM), coupledwith the groundwater flow model MODFLOW, in two different climatic,geological, and socioeconomic regions: the Seewinkel area (Austria) and theBhima basin (India). The coupled model enables simulation of the impact ofthe water table on groundwater–soil and groundwater–river exchanges,groundwater recharge through leaking canals, and groundwater pumping. Thisregional-scale analysis enables assessment of the model's ability tosimulate water tables at fine spatial resolutions (1 km for CWatM, 100–250 m for MODFLOW) and when groundwater pumping is well estimated. Evaluatinglarge-scale models remains challenging, but the results show that thereproduction of (1) average water table fluctuations and (2) water tabledepths without bias can be a benchmark objective of such models. We foundthat grid resolution is the main factor that affects water table depth biasbecause it smooths river incision, while pumping affects time fluctuations.Finally, we use the model to assess the impact of groundwater-basedirrigation pumping on evapotranspiration, groundwater recharge, and watertable observations from boreholes. 

Systems models of the Food–Water–Energy (FWE) nexus face a conceptual difficulty: the systematic integration of local stakeholder perspectives into a coherent framework for analysis. We present a novel procedure to co-produce and systematize the real-life complexity of stakeholder knowledge and forge it into a clear-cut set of challenges. These are clustered into the Pressure–State–Response (PSIR) framework, which ultimately guides the development of a conceptual systems model closely attuned to the needs of local stakeholders. We apply this approach to the case of the emerging megacity Pune and the Bhima basin in India. Through stakeholder workshops, involving 75 resource users and experts, we identified 22 individual challenges. They include exogenous pressures, such as climate change and urbanization, and endogenous pressures, such as agricultural groundwater over-abstraction and land use change. These pressures alter the Bhima basin’s system state, characterized by inefficient water and energy supply systems and regional scarcity. The consequent impacts on society encompass the inadequate provision with food, water, and energy and livelihood challenges for farmers in the basin. An evaluation of policy responses within the conceptual systems model shows the complex cause–effect interactions between nexus subsystems. One single response action, such as the promotion of solar farming, can affect multiple challenges. The resulting concise picture of the regional FWE system serves resource users, policymakers, and researchers to evaluate long-term policies within the context of the urban FWE system. While the presented results are specific to the case study, the approach can be transferred to any other FWE nexus system. 

Abstract Droughts are anticipated to intensify in many parts of the world due to climate change. However, the issue of drought definition, namely the diversity of drought indices, makes it difficult to compare drought assessments. This issue is widely known, but its relative importance has never been quantitatively evaluated in comparison to other sources of uncertainty. Here, encompassing three drought categories (meteorological, agricultural, and hydrological droughts) with four temporal scales of interest, we evaluated changes in the drought frequency using multi-model and multi-scenario simulations to identify areas where the definition issue could result in pronounced uncertainties and to what extent. We investigated the disagreement in the signs of changes between drought definitions and decomposed the variance into four main factors: drought definitions, greenhouse gas concentration scenarios, global climate models, and global water models, as well as their interactions. The results show that models were the primary sources of variance over 82% of the global land area. On the other hand, the drought definition was the dominant source of variance in the remaining 17%, especially in parts of northern high-latitudes. Our results highlight specific regions where differences in drought definitions result in a large spread among projections, including areas showing opposite signs of significant changes. At a global scale, 7% of the variance resulted independently from the definition issue, and that value increased to 44% when 1st and 2nd order interactions were considered. The quantitative results suggest that by clarifying hydrological processes or sectors of interest, one could avoid these uncertainties in drought assessments to obtain a clearer picture of future drought change. 

Abstract. Billions of people rely on groundwater as being an accessible source of drinking water and for irrigation, especially in times of drought. Its importance will likely increase with a changing climate. It is still unclear, however, how climate change will impact groundwater systems globally and, thus, the availability of this vital resource. Groundwater recharge is an important indicator for groundwater availability, but it is a water flux that is difficult to estimate as uncertainties in the water balance accumulate, leading to possibly large errors in particular in dry regions. This study investigates uncertainties in groundwater recharge projections using a multi-model ensemble of eight global hydrological models (GHMs) that are driven by the bias-adjusted output of four global circulation models (GCMs). Pre-industrial and current groundwater recharge values are compared with recharge for different global warming (GW) levels as a result of three representative concentration pathways (RCPs). Results suggest that projected changes strongly vary among the different GHM–GCM combinations, and statistically significant changes are only computed for a few regions of the world. Statistically significant GWR increases are projected for northern Europe and some parts of the Arctic, East Africa, and India. Statistically significant decreases are simulated in southern Chile, parts of Brazil, central USA, the Mediterranean, and southeastern China. In some regions, reversals of groundwater recharge trends can be observed with global warming. Because most GHMs do not simulate the impact of changing atmospheric CO2 and climate on vegetation and, thus, evapotranspiration, we investigate how estimated changes in GWR are affected by the inclusion of these processes. In some regions, inclusion leads to differences in groundwater recharge changes of up to 100 mm per year. Most GHMs with active vegetation simulate less severe decreases in groundwater recharge than GHMs without active vegetation and, in some regions, even increases instead of decreases are simulated. However, in regions where GCMs predict decreases in precipitation and where groundwater availability is the most important, model agreement among GHMs with active vegetation is the lowest. Overall, large uncertainties in the model outcomes suggest that additional research on simulating groundwater processes in GHMs is necessary. 

Abstract. We develop a new large-scale hydrological and water resources model, theCommunity Water Model (CWatM), which can simulate hydrology both globallyand regionally at different resolutions from 30 arcmin to 30 arcsec atdaily time steps. CWatM is open source in the Python programming environmentand has a modular structure. It uses global, freely available data in thenetCDF4 file format for reading, storage, and production of data in acompact way. CWatM includes general surface and groundwater hydrologicalprocesses but also takes into account human activities, such as water useand reservoir regulation, by calculating water demands, water use, andreturn flows. Reservoirs and lakes are included in the model scheme. CWatMis used in the framework of the Inter-Sectoral Impact Model IntercomparisonProject (ISIMIP), which compares global model outputs. The flexible modelstructure allows for dynamic interaction with hydro-economic and water qualitymodels for the assessment and evaluation of water management options.Furthermore, the novelty of CWatM is its combination of state-of-the-arthydrological modeling, modular programming, an online user manual andautomatic source code documentation, global and regional assessments atdifferent spatial resolutions, and a potential community to add to, change,and expand the open-source project. CWatM also strives to build a communitylearning environment which is able to freely use an open-source hydrologicalmodel and flexible coupling possibilities to other sectoral models, such asenergy and agriculture. 

Abstract. Global water models (GWMs) simulate the terrestrial watercycle on the global scale and are used to assess the impacts of climatechange on freshwater systems. GWMs are developed within different modellingframeworks and consider different underlying hydrological processes, leadingto varied model structures. Furthermore, the equations used to describevarious processes take different forms and are generally accessible onlyfrom within the individual model codes. These factors have hindered aholistic and detailed understanding of how different models operate, yetsuch an understanding is crucial for explaining the results of modelevaluation studies, understanding inter-model differences in theirsimulations, and identifying areas for future model development. This studyprovides a comprehensive overview of how 16 state-of-the-art GWMs aredesigned. We analyse water storage compartments, water flows, and humanwater use sectors included in models that provide simulations for theInter-Sectoral Impact Model Intercomparison Project phase 2b (ISIMIP2b). Wedevelop a standard writing style for the model equations to enhance modelintercomparison, improvement, and communication. In this study, WaterGAP2used the highest number of water storage compartments, 11, and CWatM used 10compartments. Six models used six compartments, while four models (DBH,JULES-W1, Mac-PDM.20, and VIC) used the lowest number, three compartments.WaterGAP2 simulates five human water use sectors, while four models (CLM4.5,CLM5.0, LPJmL, and MPI-HM) simulate only water for the irrigation sector. Weconclude that, even though hydrological processes are often based on similarequations for various processes, in the end these equations have beenadjusted or models have used different values for specific parameters orspecific variables. The similarities and differences found among the modelsanalysed in this study are expected to enable us to reduce the uncertaintyin multi-model ensembles, improve existing hydrological processes, andintegrate new processes.